A portfolio series by Nick Waine

Learn the joint by making it, then looking closely.

A three-board SMD practice kit, photographed at home under a digital microscope, as practice for IPC-A-610 inspection. The bench is set up, and the first practice columns are soldered.

In progress · First board assembled and powered · Troubleshooting the chase

005   /   THE FIRST BOARD LIGHTS UP

The lamp-ring resistors, the first SMT chips, and a board that lights up, if not quite as one chasing dot.

Read the latest entry
001   /   PROJECT KICKOFF

Setting up the bench before the first joint.

Read the first entry

Planned next: the rest of the DIY Lucky running water lamp, then Board 2, Board 3, and IPC-A-610 inspection practice. Those entries will be written after the work is done.